How to Refinance a Business Loan in Australia: The 7-Step Process, Timeline and Costs

By Pooja Choudhary, Founder & Director, Probiz Finance  |  Published 9 November 2026  |  Last reviewed: 9 November 2026  |  10 min read

Australian business owner reviewing commercial loan paperwork to refinance after the November 2026 RBA rate rise

Short answer: Refinancing a business loan in Australia follows seven steps: define why you are refinancing, pull your current position, get a written break and discharge quote, model the alternatives, match the lender before you apply, prepare a complete credit file, then settle and diarise the next review. Timeframes vary widely by lender, security type and how complete the file is, with commercial valuations and legal work usually the longest steps. Start before a reset date, not in the month it falls due. All finance is subject to lender assessment, eligibility criteria, fees and charges.

Rate update — 9 November 2026: On 3 November the RBA raised the cash rate by 25 basis points to 4.85%. That is the fifth increase of 2026 and the highest cash rate since 2008. Across the year the cash rate has risen 1.25 percentage points, from 3.60% to 4.85%. The Board was divided, voting six to three, with three members preferring to hold at 4.60%. The next decision is scheduled for 8 December 2026. Our breakdown of the November decision covers what it means for business borrowers.

There is a particular kind of phone call we take in the week after a rate rise. The business is fine. Revenue is where it should be. But the owner has just worked out that the facility they set up in 2021 is going to reset into a very different world, and they are not sure what to do first.

This article is the answer to "what do I do first". It walks through the refinance process end to end — what happens at each step, what it costs, how long it takes, and the two points where most owners lose months without realising it.

If you are still working out whether you have a problem, start with our guide to how lenders re-test serviceability when rates rise. If rising repayments are already squeezing cash flow, our guide to refinancing a business loan when interest rates rise covers the options. This article picks up from the point where you have decided to act.

Why the pressure is landing now

Two things are converging, and neither of them is the headline rate.

Fixed-rate periods are rolling off into a different market

A commercial facility fixed in 2021 or 2022 was priced in a world where the cash rate was near zero. Those fixed periods are expiring now, into a 4.85% cash rate. The borrower did nothing wrong and nothing changed in the business — the repayment simply steps up at expiry, often sharply.

Interest-only periods are ending, and that is usually the bigger jump

This is the one owners consistently underestimate. Moving from interest-only to principal and interest adds the principal component to every repayment, and that component is driven by the remaining term, not by the rate.

Illustrative arithmetic only: a $1.5 million facility rolling off interest-only with fifteen years remaining has to repay roughly $100,000 of principal a year — about $8,333 a month — before a single dollar of interest. For most businesses that dwarfs the effect of any individual rate rise. You can model the step-up on your own numbers with our business loan calculator.

And interest cover tightens quietly in the background

ILLUSTRATIVE EXAMPLE ONLY Interest cover tightens without a single lost sale. BEFORE EBIT $300,000 Annual interest $120,000 ICR 2.50x → rates rise AFTER EBIT (unchanged) $300,000 Annual interest $135,000 ICR 2.22x
Illustrative only. ICR = EBIT ÷ annual interest. Earnings unchanged; cover falls because the denominator moved.

The seven steps

1Define what you are actually solving

"A better rate" is rarely the real objective. Monthly cash flow, releasing a property held as security, consolidating facilities across lenders, buying headroom before a reset, or getting out from under a covenant are all different problems with different solutions — and some of them do not need a new lender at all. Our business refinance service starts with exactly this question.

Write the objective down in one sentence before you do anything else. Every later decision gets tested against it.

2Pull your current position

Get your facility agreements out and record, for each one: the balance, the rate and whether it is fixed or variable, the remaining term, whether it is interest-only and when that ends, the next annual review date, every covenant with its required level, and exactly what is held as security.

Most owners cannot answer all of these from memory. Doing it properly takes an afternoon and it is the single most valuable afternoon in the process.

3Get break and discharge costs in writing

If any part of your facility is fixed, ask your current lender for a written break quote. Break costs on commercial fixed loans can be substantial and they move with market rates, so a figure quoted verbally last month is not a figure you can plan on. Ask for the discharge and security release fees at the same time.

This is a quote request, not a notice that you are leaving. It does not commit you to anything.

4Model the alternatives before you choose one

Run your objective against each realistic route — staying put and renegotiating, moving to another bank, a non-bank or Alt-Doc lender, extending the term or re-amortising, consolidating facilities — and compare total cost over the period you will actually hold the debt, not just the headline rate.

A lower rate on a shorter term can leave you worse off month to month. A slightly higher rate on a restructured facility can do the opposite.

5Match the lender before you apply anywhere

This is the step that protects your credit file. Credit applications can be recorded as enquiries on your credit report, and several rushed applications read very differently to one well-prepared one. Lender appetite varies by industry, security type, loan purpose, ABN and GST history, and ATO position — and it changes.

Working out which lenders can realistically do the deal, before anything is submitted, is most of what a broker is for.

6Prepare a complete credit file

Incomplete files sit. Complete files move. A credit assessor reading a file with current financials, a clean ATO statement and a forecast with stated assumptions is making a different decision from one chasing documents for three weeks.

The checklist is below.

7Settle, then diarise the next review

At settlement, confirm which securities have actually been released and get it in writing. Then put the new review date, any interest-only expiry and any fixed expiry straight into your calendar with a reminder ninety days out.

The owners who never get caught by a reset are not the ones with the best rate. They are the ones with the dates in a calendar.

Model it before you commit to anything

Compare your current position against the alternatives in a few minutes.

Commercial Refinance Calculator

How long does it take?

Work backwards from your reset date 90 days Steps 1–3 Position, quotes 60 days Steps 4–6 Model, match, apply 30 days Valuation & legals The slowest stage Reset Settled A planning guide, not a lender commitment. Actual timeframes depend on the lender, the security and how complete the application is.
A ninety-day runway gives you options. Thirty days gives you whatever your current lender offers.

Timeframes vary widely and no broker can promise one. What is consistent is the order of the bottlenecks: commercial valuations and legal work are almost always the longest stages, and an application missing financials or an ATO portal statement will sit until they arrive.

The practical guidance is to start ninety days before a reset date rather than in the month it falls due. The difference is not administrative. At ninety days you can compare lenders and walk away from a bad offer. At thirty days you take what you can get.

What it costs

CostWhat to ask for
Fixed-rate break costA written quote from your current lender, dated. Often the largest single item, and it moves with market rates.
Discharge / security releaseCharged by the outgoing lender, usually per security released.
ValuationCommercial valuations cost more and take longer than residential. A new valuation can move your LVR in either direction.
Legal and settlementBoth lenders' legals, plus your own where the structure is complex.
Registration / PPSRApplies where assets or a general security agreement are involved.
Establishment feeCharged by the incoming lender, sometimes as a percentage of the facility.

Amounts depend entirely on your lender, loan size and security. Ask for written figures rather than relying on general ranges, and set the total against the benefit over the period you will actually hold the debt.

When refinancing is not the answer

It is worth saying plainly, because a broker telling you to refinance is not always a broker helping you.

  • The break cost outweighs the benefit over your remaining term. Sometimes the honest answer is to wait for the fixed period to expire.
  • The real problem is trading, not structure. Refinancing a facility a business cannot service moves the problem rather than solving it, and a new lender will see the same numbers.
  • Your current lender will restructure. Term, amortisation and security release are all negotiable with the bank you already have. That costs nothing and is always worth asking.
  • A settlement, sale or major change is imminent. Restructuring weeks before the business changes shape usually means doing it twice.

The document checklist

  • Two years of financial statements plus the most recent interim figures
  • Two years of BAS and the most recent lodgement
  • A current ATO portal statement, including any ATO payment plan and its conduct history
  • Aged debtors and aged creditors
  • Every existing facility agreement, including covenant schedules and review dates
  • Written break and discharge quotes
  • For property security: the lease schedule and WALE (see our commercial property loans page for how lenders assess it)
  • A forward cash-flow forecast with the assumptions written down

From the credit desk

I spent more than 15 years in institutional credit risk and commercial lending before starting Probiz Finance. Three things slow a refinance down more than anything else, and all three are inside the borrower's control.

  1. The file arrives in pieces. An assessor who has to ask three times for the same document forms a view about the business before they reach the numbers.
  2. The ATO position is explained after it is discovered, not before. A payment plan that is current and disclosed up front is a very different conversation from one found on the portal statement.
  3. There is no forecast, or the forecast has no assumptions. A credible forecast is not an optimistic one. It is one where someone can see what has been assumed and decide whether they agree.

None of this requires a better business. It requires a better-prepared file, which is a much easier thing to change.

Frequently asked questions

How long does it take to refinance a business loan in Australia?

It varies widely by lender, loan complexity, security type and how complete the application is, so no single figure applies. Commercial valuations and legal work are usually the longest stages, and a file missing financials or an ATO portal statement will wait until they arrive. As a planning guide, begin around ninety days before a fixed-rate expiry, interest-only expiry or annual review, rather than in the month it falls due. Starting early is what gives you the ability to compare lenders rather than accept whatever is available.

Can I refinance a business loan that is still in a fixed-rate period?

Usually yes, but the fixed period is broken and a break cost applies. Break costs on commercial fixed loans can be substantial and move with market rates, so the only reliable figure is a current written quote from your existing lender. Get that quote before you compare anything, then weigh it against the benefit over the period you will actually hold the debt. In some cases the honest answer is to wait until the fixed term expires and prepare in the meantime.

What happens when my interest-only period ends?

Repayments move to principal and interest, which adds the principal component to every repayment. That component is driven by the remaining term rather than the rate. As an illustration, a $1.5 million facility with fifteen years remaining must repay roughly $100,000 of principal a year before any interest. For many businesses this is a larger step-up than any single rate rise, which is why interest-only expiry deserves its own date in the calendar.

Will refinancing hurt my credit file?

Credit applications can be recorded as enquiries on your credit file. One well-prepared application to a lender whose policy fits your situation is very different from several rushed applications submitted in the hope that one lands. The usual approach is to establish which lenders can realistically do the deal before anything is submitted, rather than applying broadly and seeing what comes back.

Should I refinance now or wait for rates to fall?

Waiting is a position, not a plan, and it only helps if nothing in your facility resets in the meantime. The questions that matter are more specific: when does your fixed or interest-only period end, when is your next annual review, and what do your covenants require. If any of those fall within the next six months, the timing question is already answered regardless of where the cash rate goes next. If none of them do, you have room to prepare properly.

Work out where you stand

A short conversation will tell you whether this is a structure problem, a pricing problem, or neither. Probiz works across a network of 50+ lenders for Australian SMEs.

Book a free conversation with Pooja Message us on WhatsApp
Pooja Choudhary, Founder and Director of Probiz Finance

About the author — Pooja Choudhary

Pooja Choudhary is the Founder and Director of Probiz Finance. She has more than 15 years of experience in tier-1 institutional credit risk and commercial lending at major Australian banks, including NAB and ANZ. She now works across a network of 50+ lenders to structure finance for Australian SMEs.

Sources

Probiz Finance is a Credit Representative (542838) of Australian Credit Licence No. 389328, Connective Credit Services Pty Ltd. This information is general in nature and does not take into account your objectives, financial situation or needs. All finance is subject to lender assessment, eligibility criteria, fees and charges. Figures described as illustrative are worked examples only and are not quotes, lender rules or current rates. Cash rate information sourced from the Reserve Bank of Australia, 3 November 2026.

YOUR BUSINESS, OUR PRIORITY

Let's Talk About Your
Business Goals

Whether you’re buying a business, expanding with property or planning your next move, we’re here to help.